• Rugged conduction cooled and compact design
  • 6-core 64-bit 2GHz ARM SOC processor
  • 2GB Onboard soldered DRAM
  • 10/100/1000Mbit Ethernet
  • SATA III Interface for optional 2.5" Flash HDD
  • 2x RS-232 Serial ports, 1x RS-485, USB2.0
  • 2x J1939 CAN ports with Bus FMS protocol support
  • 5-band 2G/3G/LTE modem with eSIM and uSIM
  • Full Audio Call support on GSM/GPRS/EDGE/3G
  • 802.11 b/g/n/ac WiFi
  • Internal GNSS receiver with IRNSS support
  • 4/8x Video Capture Inputs (CV)
  • 24V Digital Inputs (4), Outputs (4), Analog Inputs (4)
  • 32/64GB eMMC Flash soldered down, SD-card socket
  • Digital Display port, HD Audio with 2 x 10W Amplifiers
  • 32-bit CORTEX M3 system and peripheral controller
  • Ignition controlled 9-38VDc input power supply, 4-hour LiPO back-up (AIS140)
  • +12VDc output for external cameras
  • -25 to +80°C operating temperature range
  • IP65
  • Designed for India ARAI compliance
  • Rugged conduction cooled and compact design
  • 6-core 64-bit 2GHz ARM SOC processor
  • 2GB Onboard soldered DRAM
  • CORTEX M0 system management and diagnostics controller
  • 10/100/1000Mbit Ethernet
  • Dual M-Key NVME SSD sockets (2260)
  • 8GB eMMC Flash soldered down, SD-card socket
  • 1x RS-232 Serial port, 1x RS-485, 2x USB2.0 (1x maintenece, 1x external)
  • CAN 2.0 with J1939 protocol support
  • 5-band LTE modem with SW selectable eSIM/uSIM
  • Full HD Audio - MIC, LINE IN, LINE OUT
  • Software configurable control for ambient noise compensation sensing
  • 802.11 b/g/n/ac/ax WiFi
  • Internal GNSS receiver with L1/L5 band support
  • ChannelLink III Digital Display port for external touchscreen HMI
  • 9-38VDC input range power supply with SuperCap back-up
  • -25 to +80°C operating temperature range
  • IP65
  • Mediatek MT7621A networking processor
  • WRT Linux with LUCY configuration
  • 10/100/1000 Ethernet port
  • MT7915DAN WiFi 6 chipset
  • Dual Band 2.4GHz and 5GHz
  • 802.11af PoE
  • Electronic serial number
  • NXP SE050 Seccurity chip
  • Designed for compliance with EN50155, ECE Reg. 10
  • Quad core CORTEX-A7 1.2GHz Application Processor
  • WRT Linux or YOCTO Linux preinstalled
  • ARM CORTEX M0 system management and I/O Controller
  • LTE CAT1 or CAT4 modem with eSIM/uSIM
  • DR-assisted GNSS navigation
  • 10/100Mbit Ethernet RJ45 connector
  • 3D accelerometer
  • 1x RS-232/485 Serial ports
  • 1x J1939 FMS CAN port, 1x CAN 2.0 port
  • EMD MVB Class 1 interface (Build Option)
  • 2 Digital inputs, 1-Wire interface
  • Internal voltage and temperature monitor
  • Electronic serial number
  • 9-36VDC input with railway/automotive grade PSU
  • Designed for compliance with EN50155, ECE Reg. 10

More Articles ...

Join our newsletter!