DG-PID32E-R - Intelligent Ethernet connected 32" Full-HD Train PID

DG-PID32E-R is a rugged purpose-built stand-alone high-reliability IP-connected Intelligent Passenger Information Display for tram and train applications. The DG-PID32E-R bases on a low power 6-core ARM CPU, which includes Duragon's proprietary firmware. This high performance Linux Application processor CPU can deliver rich media content combining HD video streams, animations and static or changing images on the HD-resolution display. Route and operational service information can be combined with media and advertising content.

Integration with train systems can use Ethernet or RS-485. The DG-PID32E-R based dynamic route map system can connect to a vehicle MVB gateway controller such as the Quasar over Ethernet. The internal Ethernet switch and bypassing relays enable series connected displays throughout the train. The bypass relays will disconnect any un-powered or faulty device automatically, ensuring that network integrity is maintained. This scheme reduces wiring and Ethernet switches. Media is not streamed over the Ethernet, only command and control information is sent downstream from the vehicle gateway. Content is stored locally, and can be updated over Ethernet. The DG-PID32E-R includes Service USB and Ethernet interfaces for system service and maintenence access.

Functionality is optimized in the DG-PID32E-R intelligent display. A high brightness and contrast LCD-display supports full HD-resolution. The proprietary single control board bases on a 6-core 2GHz ARM media and graphics CPU, supervised by a microcontroller, which manages all the displays functionality including safe power on-off, secure booting, as well as voltage and temperature monitoring and event logging.

The Duragon DG-PIDE-R series displays can be powered directly from the 110VDC power rail of the train. A proprietary multi-stage protection and filtering circuitry is designed to exceed the requirements of EMC and immunity standards. This proprietary power supply design is compliant to EN60950-1.

Duragon Systems can provide customization services, which can include engineering, production and certification. Available are different LCD sizes ranging from 28" to 48", enclosure solutions, as well as project specific functionalities or SW interfaces to other onboard systems.

  • icon HIGHLIGHTS
  • icon APPLICATIONS
  • icon SPECIFICATIONS
  • icon DOWNLOADS
  • 32" Active matrix color TFT, LED backlight
  • Resolution 1920 x 1080
  • Brightness 500nits, contrast 1000:1
  • Software controlled brightness and display parameters
  • 6-core 2GHz RK3399 ARM multimedia processor with dedicated firmware
  • 32-bit CORTEX M3 system management coprocessor
  • Internal control system features:
    • Temperature monitoring and warning +50C
    • Controlled display start, power control
    • LED backlight brightness control
    • Ignition Key monitoring and controlled ON-OFF
    • Event and error logging
    • Modem access in case of main CPU failure
  • Supporting smart Graphics, bitmaps, animations, live video
  • Dual 10/100Mbit Ethernet ports with port bypassing relays
  • 110VDC isolated power supply
  • Panel Surface Anti-glare, hard coating (3H)
  • IP52, operating temperature -25 to 55C
  • Dynamic Route Map Display
  • On-board PIS
  • High End Infotainment
  • Ethernet connected PID

SYSTEM:

  • 6-core 64-bit RK3399 SOC application processor
  • 2GB DRAM, 16GB eMMC Flash disk
  • SD-slot for removable storage
  • Dual Channel LVDS display interface

DISPLAY:

  • 32" Ultra-Wide active matrix color TFT
  • Resolution 1920 x 1080
  • Active display area 698.4 (H) x 392.85(V)
  • LED backlight with SW control
  • 16:9 aspect ratio
  • Brightness 500cd/m2, 1000:1 contrast
  • Viewing angle 178(H) / 178(V)
  • Response time 6.5ms

STANDARD INTERFACES:

  • Dual 10/100Mbit Ethernet with switch and relay bypass
  • Service USB and service Ethernet(under access panel)
  • Isolated RS-485 interface

OPTIONAL INTERFACES:

  • 3G/LTE modem with SIM card slot
  • 802.11n/ac WiFi with structural antenna
  • MVB interface (ESD+ or EMD)

MONITORING:

  • System power rails
  • SW configurable LCD Power ON-OFF
  • Event and error LOG
  • Temperature monitoring and display control
  • Software controlled backlight soft-start
  • Diagnostics features

MECHANICAL:

  • Aluminum/sheet metal enclosure
  • Matt black powder coated finish
  • Connectors: D-Coded M12 and A-coded M12

POWER SUPPLY:

  • 110VDc nominal (66 to +160Vdc)
  • Isolation 1500V
  • 45W typical power consumption

DIMENSIONS:

  • 732(W) x 426(H) x 66(D)

WEIGHT:

  • 6,1Kg

TEMPERATURE RANGE:

  • Operating: -25° to +55°C, thermal overload shutdown
  • Storage: -25° to +70°C

HUMIDITY:

  • 95% at 45°C non-condensing

PROTECTION:

  • IP52, front face

DG-EL16128P8-R - 16 X 128 LED Passenger Information Display

The DG-EL16128P8-R is a rugged LED passenger information display targeting metro, train and tram installations. This display is purpose-built for railway applications with a wide 8-38VDC input range power supply. The LED chip resolution is 8mm in horizontal and vertical direction.

The display is based on a 32-bit CORTEX-M3 microcontroller with dedicated firmware, which can be customized to meet the specific requirement of each project, including custom graphics elements and language support. Error and diagnostic codes can be used to monitor the health of the display and its correct operation. Furthermore, the electrical parameters of each LED can be checked to detect open connection, short to ground or short to supply.

Constant current LED sink drivers are used to drive high brightness SMD LED chip components to increase the reliability and ruggedness of the display. The LED matrix brightness can be controlled from 0 to 100% under software control or based on ambient lighting conditions. The display base is black for improving contrast. The LED area is covered by a laminated tamper proof safety glass.

Duragon Systems can provide customization services, which can include engineering, production and certification. Available are different LED reolutions and chip spacing, enclosure and mounting solutions, as well as project specific functionalities or SW interfaces to other onboard systems.

  • DG-EL16128P8-R HIGHLIGHTS
  • DG-EL16128P8-R SPECIFICATIONS
  • 16 x 128 LED matrix, P8 (8mm pitch)
  • PLCC2 SMD LEDs
  • LED Brightness 1000cd/m2
  • 32-Bit CORTEX M3 controller with dedicated firmware
  • Filtered and protected RS-485 interface
  • Ambient light level sensing
  • 8-38VDC power supply
  • Protective vandalproof tempered glass cover
  • Aluminum enclosure
  • IP52, operating temperature -25 to 55C
  • EN50155 and EN50121 compliant
Read More

DISPLAY:

  • 16 x 128 LED configuration, 8mm Pitch
  • SMD LEDs, PLCC2 package 3.2 x 2.8mm
  • 591nm dominant wavelength (amber)
  • 60 degree viewing angle all round (50% luminosity)
  • Constant 20mA current LED driver
  • LED chip brightness 1000cd/m2 typical
  • Automatic ambient light or SW brightness control
  • INTERFACES:

    • EMC Filtered and ESD protected RS-485 interface

    OPTIONAL INTERFACES:

    • CAN 2.0

    MONITORING:

    • System power rails, input voltage, LED voltage
    • Internal temperature
    • Ambient light 820-900nm IR-band

MECHANICAL:

  • Aluminum metal enclosure
  • Matt black powder coated finish
  • Connectors: A-Coded M12

POWER SUPPLY:

  • 8-38VDC
  • Max power consumption 65W

DIMENSIONS:

  • TBD

WEIGHT:

  • TBD

TEMPERATURE RANGE:

  • Operating: -25° to +55°C, thermal throttling of LED brightness
  • Storage: -40° to +85°C

HUMIDITY:

  • 95% at 45°C non-condensing
  • Conformal coating

PROTECTION:

  • IP52, front face
Read More

DG-DN8255 - Duro-Net Railway Power-Line Modem

The Duro-Net DG-DN8255 is a pupose built railway Power-Line Modem which can be used with 24/110VDC or 240VAC power lines. Included is a embedded self adaption filter and communication controller, which ensure the best performance under different electrical environments and different media. The DG-DN8255 is ideal for modernisation and upgrade projects, where no additional cabling is available for creating a train-wide TCP/IP Ethenet network. One Power-Line modem is configured as the master device, which support several hundreds of slave devices on the same network.

Every SLAVE is paired with the MASTER device, which is typically located in the Driver Cab attached to the HMI. A SLAVE node can communicate with the MASTER node and any other SLAVE node, which has been paired with the same MASTER device on the train. Typically SLAVE nodes are conected to the Coach-Controller of the PI-System. With a train-wide Ethenet network, announcement audio files and messages can be updated easily from a single point from the main PIS HMI in the Driver Cab.

The modem is based on wavelet OFDM (Orthogonal frequency division multiplexing) technology. It has unique advantages, which include:

  • Efficient use of the available bandwidth
  • Sharp side band rejection since signals is orthogonal in both frequency and time domains
  • Wavelet OFDM is the only technology, which can pass EMC regulations
  • Strong noise rejection capability
  • Silicon-level AES 128 encryption
  • Transparent 10/100Mbit Ethernet interface with zero configuration

The DG-DN8255 is available in three variants:

  • DG-DN8255-01 for 24/48VDC powered systems such as Diesel locomotive trains or trams
  • DG-DN8255-02 for 74/110VDC powered train systems
  • DG-DN8255-03 for 240VAC line powered systems

DG-HMI70-10 - 7" Wireless Railway HMI

DG-HMI70-10 is a rugged purpose-built highly integrated HMI computer for tram and train installtions. The DG-HMI70-10 combines a low power 6-core 64-bit ARM CPU with a 7" Widescreen PCAP TFT display. The high performance RK3399 Linux application processor includes a HW graphics accelerator, which reduces system GUI response times. The PCAP touchscreen includes a dedicated display area as well as four illuminated shortcut keys, which the touchscreen controller maps to standard keyboard F1-F4 function keys. Extensive QT software tooling and middleware software is available accelerating software development.

Integration with train systems can use Ethernet, RS-485 or MVB. The DG-HMI70-10 is suitable for modernisation and upgrade programs as a master controler or gateway in PIS, diagnostics or other operative onboard applications.

The Duragon DH-HMI70-10 HMI computer can be powered directly from the 110VDC power rail of the train. A proprietary multi-stage protection and filtering circuitry is designed to exceed the requirements of EMC and immunity standards. This proprietary power supply design is compliant to EN60950-1.

Duragon Systems can provide customization services, which can include engineering, production and certification. Available are different interfaces, mechanical mounting structures as well as enclosure or connector solutions. The PCAP glass can include customer's LOGO laminated into the internal layers. Contact Duragon for details on labelling customisation options.

  • icon HIGHLIGHTS
  • icon APPLICATIONS
  • icon SPECIFICATIONS
  • Active matrix 7" color TFT, LED backlight
  • Resolution 800 x 480
  • Brightness 500nits, contrast 600:1
  • High sensitivity PCAP touchscreen, 4x PCAP shortcut keys
  • 6-core 2GHz RK3399 ARM multimedia processor, 2GB DDRL RAM, 16GB eMMC Flash, SD-slot
  • Internal Wireless Interfaces:
    • 3G/LTE CAT1 modem with multiplexed eSIM and uSIM
    • 802.11 n/ac WiFi, Optional Bluetooth 4.0
    • GNSS receiver with GPS/GLONASS/IRNSS constellation support
  • Optional DUAGON MVB interface (ESD+ and EMD)
  • 10/100/1000Mbit Ethernet, RS-485, Service USB
  • 110VDC isolated power supply
  • IP65/52, operating temperature -25 to 55°C
  • Dynamic Route Map Display Master Controller
  • Announcement and LED PIS Upgrades and Modernisation

SYSTEM:

  • 6-core 64-bit RK3399 SOC application processor
  • 2GB DRAM, 16GB eMMC Flash disk
  • SD-slot for storage expansion

DISPLAY:

  • 7" active matrix color TFT
  • Resolution 800 x 460
  • Active viewing area 152.4 x 91.44mm
  • High sensitivity PCAP touchscreen
  • 4x backlit PCAP function keys
  • LED display backlight with SW control
  • Brightness 500cd/m2
  • Viewing angle 178(H) / 178(V)
  • Response time 5ms

STANDARD INTERFACES:

  • 10/100/1000Mbit Ethernet
  • USB under service panel
  • RS-485 interface

WIRELESS INTERFACES:

  • 3G/LTE CAT 1 modem with eSIM and
    uSIM card slot
  • 802.11n/ac WiFi
  • GNSS receiver with GPS, GLONASS and
    IRNSS support, antenna diagnostics

OPTIONAL INTERFACES:

  • Bluetooth 4.0
  • MVB interface (ESD+ or EMD)

MECHANICAL:

  • CNC cut aluminum frame enclosure
  • Rear side service panel
  • Connectors: D-Coded M12 and
    A-coded M12, DB9(MVB), SMA(Wireless)

POWER SUPPLY:

  • 110VDC nominal (43 to +160Vdc)
  • Isolation 1500V
  • 12W typical power consumption

DIMENSIONS:

  • 224mm(W) x 124mm(H) x 27mm(D)
  • Connector space 27mm

WEIGHT:

  • 2,1Kg

TEMPERATURE RANGE:

  • Operating: -25° to +55°C
  • Storage: -40° to +85°C

HUMIDITY:

  • 95% at 45°C non-condensing

PROTECTION:

  • IP65, front face
  • IP52, rear side

DURION BDC - 7" PCAP Bus Driver Console

OVERVIEW:

The DURION™ BDC is designed to compliment the DURION™ BUS-PC, adding a rugged Bus Driver Console (BDC) to the system. This BDC is an integrated display unit, combining an automotive grade 7" LCD display, a Projected Capacitive Touchscreen, Capacitive Function/Pushbutton keys and an internal power supply. The LCD element is optically bonded to the hardened capacitive touchscreen glass. The Pushbuttons are included in the touchglass, logically operating as individual true keyboard keys created through the PCAP touchcontroller firmware. The durable capacitive touchscreen and non-mechanical buttons are sensitive and fully maintenance free. The surface of the BDC is continuous glass, making cleaning of the surface easy.

The BDC connects with the BUS-PC with DuroLink II, a fully digital serialized interface, which combines LCD-native 18-bit LVDS data with power and a buffered I2C interface. This technology replaces the traditional bundle of power, VGA and USB cables and their connectors with a single shielded CAT6 cable and a sealed M12 connector. The Duragon Systems BDC is built into a rigid CNC-machined aluminum frame providing ideal protection for the PCAP glass, which is embedded and flush mounted into the frame creating a sealed IP65 construction. The rear side includes VESA75 mounting holes. External mechanical customization is possible to acommodate different mounting requirements.

  • icon Features
  • icon Applications
  • icon Specifications
  • Rugged, sealed and compact design
  • 7" 800 x 480 resolution automotive LCD
  • 152.4 x 91.44mm active viewing area
  • 500cd/m2 brightness, 600:1 contrast
  • Auto-adjusting LED Backlight
  • Optically bonded Projected Capacitive Touchscreen
  • 4x PCAP Funtion keys, F1, UP, DN, ENTER
  • DuroLink II digital interface with M12 connector
  • Supporting live cable connection
  • Cable lengths up to 5m (standard 2.5m)
  • Power Supply nominal +12V (from Bus-PC)
  • -25 to +80°C operating temperature range
  • Aluminum enclosure
  • IP65 Ingress protection
Read More
  • Durion BUS-PC Driver Console
  • Vehicle PIS Interface
  • Vehicle Diagnostics Display
  • Console for Digital Signage
Read More
Tomi Hanninen

SYSTEM

  • Fully interated PCAP Touchscreen Display
  • 4x illuminated Function Keys
  • Autoadjusting LED backlight
  • Serialized digital interface
  • Sealed rugged enclosure
  • Industrial temperature range -25 to +85°

DISPLAY

  • Automotive grade 7" widescreen, 800 x 480 resolution
  • Native 18-bit LVDS interface control
  • 500nit brightness, 600:1 contrast
  • 152.4 x 91.44mm active viewing area
  • -30 to +85°C operating temperature
  • LED backlight with ambient light sensing
  • Optically bonded to capacitive touch-glass

TOUCHSCREEN

  • Integrated touchglass with touchscreen and buttons
  • High sensitivity and fast response time
  • Superior optical characteristics compared to resistive technology
  • Fully customized touchcontroller firmware
  • Independent 4x capacitive buttons
  • Pushbuttons mapped to F1, UP, DN, ENTER keys
  • Uniform durable surface sealed to enclosure frame

INTERFACE

  • Digital DuroLink II Interface
  • Serialized, high-speed differential interface
  • 18-bit LVDS, I2C and Power in a single cable
  • Improved EMI performance from spread spectrum modulation
  • Enables Single CAT6 cable with M12 connectors
  • Supports live inserting and removal of cable
  • Up to 5m cable, Standard cable 2.5m

MECHANICAL

  • CNC cut aluminum enclosure
  • Weight (TBD)
  • Dimensions (TBD)
  • M12 interface connector

ENVIRONMENTAL

  • -25 ~ +80°C operating temperature
  • 95% RH, non condensing
  • IP65 ingress protection
Read More
Join our newsletter!