DG-LED16x96-R

DG-EL1696P8-R - 16 X 96 LED Passenger Information Display

The DG-EL1696P5-R is a rugged LED passenger information display targeting metro, train and tram installations. This display is purpose-built for railway applications with a wide 8-38VDC input range power supply. The LED chip resolution is 5mm in horizontal and vertical direction.

The display is based on a 32-bit CORTEX-M3 microcontroller with dedicated firmware, which can be customized to meet the specific requirement of each project, including custom graphics elements and language support. Error and diagnostic codes can be used to monitor the health of the display and its correct operation. Furthermore, the electrical parameters of each LED can be checked to detect open connection, short to ground or short to supply.

Constant current LED sink drivers are used to drive high brightness SMD LED chip components to increase the reliability and ruggedness of the display. The LED matrix brightness can be controlled from 0 to 100% under software control or based on ambient lighting conditions. The display base is black for improving contrast. The LED area is covered by a laminated tamper proof safety glass.

Duragon Systems can provide customization services, which can include engineering, production and certification. Available are different LED reolutions and chip spacing, enclosure and mounting solutions, as well as project specific functionalities or SW interfaces to other onboard systems.

DG-EL1696P5-R HIGHLIGHTS
DG-EL1696P5-R SPECIFICATIONS

16 x 96 LED matrix, P5 (5mm pitch)
PLCC2 SMD LEDs
LED Brightness 1000cd/m2
32-Bit CORTEX M3 controller with dedicated firmware
Filtered and protected RS-485 interface
Ambient light level sensing
8-38VDC power supply
Protective vandalproof tempered glass cover
Aluminum enclosure
IP52, operating temperature -25 to 55C
EN50155 and EN50121 compliant

16 x 96 LED configuration, 5mm Pitch
SMD LEDs, PLCC2 package 3.2 x 2.8mm
591nm dominant wavelength (amber)
60 degree viewing angle all round (50% luminosity)
Constant 20mA current LED driver
LED chip brightness 1000cd/m2 typical
Automatic ambient light or SW brightness control

INTERFACES:

EMC Filtered and ESD protected RS-485 interface

OPTIONAL INTERFACES:

CAN 2.0

MONITORING:

System power rails, input voltage, LED voltage
Internal temperature
Ambient light 800-900nm IR-band

MECHANICAL:

Aluminum metal enclosure
Matt black powder coated finish
Connectors: A-Coded M12

POWER SUPPLY:

8-38VDC
Max power consumption 45W

DIMENSIONS:

WEIGHT:

TEMPERATURE RANGE:

Operating: -25° to +55°C, thermal throttling of LED brightness
Storage: -40° to +85°C

HUMIDITY:

95% at 45°C non-condensing
Conformal coating

PROTECTION:

IP52, front face