SYSTEM
- 6-core 64-bit 2GHz Linux ARM SOC processor
- 32-bit CORTEX M0 system management coprocessor
- 2GB soldered down DRAM
- 8GB soldered down eMMC FLASH disk, SD-card
- Internal Dual NVME SSD M.2 <-key sockets
- Secure electronic serial number and TPM 2.0
DISPLAY INTERFACES
- ChannelLink III Serialized automotive display interface
- Self-clocked spread spectrum serialization of LVDS and I2C
- 18-bit native LVDS, I2C-bus for touchscreen, 12V power
- HMI Display interface in single pair of CAT5 cable
- Compatible with DURION SCU PCAP HMI
WIRELESS INTERFACES
- 5-band LTE CAT4 modem with APAC band support
- uSIM slot (under service panel)
- Support for soldered down eSIM (software selectable)
- 802.11ax/ac high speed WiFi
- UDR supported L1/L5 GNSS receiver with GPS/IRNSS/GLONASS support
SENSORS
- Internal temperature
- 3D accelerometer
- 3D gyroscope
I/O INTERFACES
- 1x RS-232 ports, 1x RS-485 port, 1x external USB 2.0
- 1x 10/100/1000Mbit Ethernet
- Stereo output LINE-levels
- Stereo input LINE-levels (ambient noise level sensing)
- 1x MIC input for announcements
SERVICE INTERFACES (under service panel)
- 1x USB 2.0
- 1x service HDMI
- Audio Jack, MIC In, Headset outputs
- Reset Button
POWER SUPPLY
- 9-38VDC input range power supply
- Supercapacitor Back-up for 2min (option)
- 48VDC reverse voltage protection
- +-2KV surge and burst protection
- +12VDC regulated power output (25W)
CONNECTORS
- 23-pin keyed AMPSEAL connectors
- X-coded M12 connector for Ethernet
- A-coded M12 connector for HMI
- SMA connectors for cellular, WiFi and GNSS
MECHANICAL
- Die-cast aluminum enclosure
- Weight (TBD)
- Dimensions (TBD)
ENVIRONMENTAL
- -25 ~ +55°C operating temperature
- 95% RH, non condensing
- IP65 ingress protection