SYSTEM
- 4-core 64-bit ARM Application Processor
- 512KB DRAM, 2GB eMMC Flash disk
- SD-slot for storage expansion
- CORTEX M0 System Management Controller
- Electronic serial number and temperature sensor
- Internal power supply voltage monitoring
OS AND SW OPTIONS:
- WRT Linux for router-type applications
- YOCTO-Linux
- Software for accelerometer interfacing
- AIS140 protocol support
STANDARD INTERFACES:
- 10/100Mbit Ethernet port
- 1x J1939 FMS CAN, 1x CAN 2.0
- 1x RS-485
- 1-wire interface
- Ignition Key and Emergency inputs (0-30VDC)
- Wheel-tick and direction sensing inputs (0-30VDC)
- 2x MOSFET Open Drain Outputs
OPTIONAL INTERFACES:
- DUAGON MVB
- Dual redundant EMD interfaces
- 2x DB-9 connectors
MECHANICALWIRELESS INTERFACES:
- SIM7600 CAT 1 LTE modem with eSIM and uSIM slot
- Modem band specification available upon request
- DR assisted GNSS receiver (ADR and UDR supported)
MECHANICAL:
- Anodized Aluminum extruded enclosure (Blue)
- uSIM under rear panel
- RJ45 FAKRA C-D Code, I/O connector, (2x DB9)
POWER SUPPLY:
- 8-36VDC
- Active voltage clamp, compliant with ISO 7637-2 and EN50155
- 5W typical power consumption
DIMENSIONS:
- 104mm(W) x 104mm(D) x 3mm(H)
- Flanges 10mm
WEIGHT:
- 0.3Kg
TEMPERATURE RANGE:
- Operating: -25° to +55°C
- Storage: -40° to +85°C
HUMIDITY:
- 95% at 45°C non-condensing
PROTECTION:
- IP41